Products RDMOTO

Navigation: Crash protectors / Crash sliders / Mounting stands / Levers / Crash frames / Tuning accessories

Crash protectors

Crash protectors on motorcycle frame

picture

Type PH01-K

Classic crash protectors in the "mushroom" design are made from black polyamide. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Type PH01-W

Classic crash protectors in the "mushroom" design are made from white polyamide. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Type PHV1K

Classic crash protectors with the anodized cap are made from black polyamide. Caps are available in seven colours. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Type PHV1W

Classic crash protectors with the anodized cap are made from white polyamide. The caps are available in seven colours. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Type PHV2K

Classic crash protectors with the anodized cap are made from black polyamide. Caps are available in seven colours. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Type PHV2W

Classic crash protectors with the anodized cap are made from white polyamide. The caps are available in seven colours. Protectors are 50mm wide and 60mm long. Each protector contains an internal steel insert to increase its strength and therefore it allows the use of shorter screws during the assembly. Protectors are tested on the road and on the racetrack. Each protector passes through quality and manufacturing control.


picture

Mounting kits for crash protectors

Mounting kits for crash protectors type PH, PHV1 and PHV2 have the same design, so it is for example possible to replace the protector PH for the protector PHV1. While developing mounting kits for these protectors our goal is to avoid modifying any original parts when you install them on your motorcycle. Nevertheless in some cases there is no other option and it is for example necessary to adjust the plastic part of motorcycle. If there is a possibility to manufacture a mounting kit which will be attached to multiple points, we will do so because this eliminates a possible damage in the mounting spot during a crash. Mounting kits are made of aluminium alloy and then anodized in black, the adapters are milled on CNC machines.


Crash protectors into front and rear wheel axis

picture

Type PVN

Crash protectors in the classic design for the front axle of the wheel are made from black polyamide. They mainly serve for the protection of the front fork. The length of the protector is 40mm and its width is 50mm. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


picture

Type PKN

Crash protectors in the classic design for the rear axle of the wheel are made from black polyamide. They mainly serve for to the protection of the swingarm. The length of the protector is 40mm and its width is 50mm. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


picture

Type PV1

Crash protectors in the classic design for the front axle of the wheel with anodized aluminium cap. They are made from black polyamide. The caps are available in seven colours They mainly serve for the protection of the front fork. The length of the protector is 25mm and its width is 49mm. Dural reductions for the axis are included. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


picture

Type PV2

Crash protectors in the classic design for the front axle of the wheel with anodized aluminium cap. They are made from black polyamide. The caps are available in seven colours They mainly serve for the protection of the front fork. The length of the protector is 25mm and its width is 49mm. Dural reductions for the axis are included. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


picture

Type PK1

Crash protectors in the classic design for the rear axle of the wheel, with anodized aluminium cap. They are made from black polyamide. The caps are available in seven colours. They mainly serve for the protection of the rear fork. The length of the protector is 25mm and its width is 49mm. Dural reductions for the axis are included. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


picture

Type PK2

Crash protectors in the classic design for the rear axle of the wheel, with anodized aluminium cap. They are made from black polyamide. The caps are available in seven colours. They mainly serve for the protection of the rear fork. The length of the protector is 25mm and its width is 49mm. Dural reductions for the axis are included. We recommend to use them together with the protectors for the motorcycle frame. Each protector passes through quality and manufacturing control and it is tested on the road.


Crash sliders

Crash slider SL01

picture

Type SL01K

One of the most effective protections for your motorcycle thanks to the large sliding surface (in comparison with the classical protector). It is made from black polyamide. The length of the slider is 119mm and its height is 72mm. The angle of the protector is adjustable according to the shape of your motorcycle. The caps are anodized and available in seven colours.


picture

Type SL01W

One of the most effective protections for your motorcycle thanks to the large sliding surface (in comparison with the classical protector). It is made from the white polyamide. The length of the slider is 119mm and its height is 72mm. The angle of the protector is adjustable according to the shape of your motorcycle. The caps are anodized and available in seven colours.


picture

Caps

The caps are made from aluminium and are available in seven colours.


picture

Mounting kits for sliders SL01

Mounting kits for crash protectors type PH, PHV1 and PHV2 have the same design, so it is for example possible to replace the protector PH for the protector PHV1. While developing mounting kits for these protectors our goal is to avoid modifying any original parts when you install them on your motorcycle. Nevertheless in some cases there is no other option and it is for example necessary to adjust the plastic part of motorcycle. If there is a possibility to manufacture a mounting kit which will be attached to multiple points, we will do so because this eliminates a possible damage in the mounting spot during a crash. Mounting kits are made of aluminium alloy and then anodized in black, the adapters are milled on CNC machines.


Crash slider DIAMOND

picture

Type SLD

New on the market for the 2014 season. Sliders Diamond are made from POM-C material. They are worked on the 5-axis CNC machines. They are adjusted to the motorcycle by using duralumin adapters. Protector can be rotated according to the shape of the motorcycle.


Mounting stands

picture

Type MS01R

Lifts up the rear of the motorcycle under the swingarm, removable , includes rubberized adapters for comfortable and secure lifting of the motorcycle, width range of adapters adjustable


picture

Type MS02R

Lifts up the motorcycle at front head mounting stand, lower part can be separated from the upper part, adjustable height of stand, bung used for lifting up the motorcycle is not included (you can choose it from our application table)


picture

Type MS03R

Lifts up the front of the motorcycle under the forks, removable, steel adapters for a comfortable and secure lifting of the motorcycle arencluded, width range of adapters adjustable


picture

Type MS04R

Lifts up the motorcycle at front head mounting stand, lower part can be separated from the upper part, adjustable height of stand, bung used for lifting up the motorcycle is not included (you can choose it from our application table)


picture

Type MS05R

Designed for motorcycles that have overhung rear wheel, lift up the rear of the motorcycle by sliding the bung into the shaft wheels from the left side, bung used for lifting up the motorcycle is not included (you can choose it from our application table), not removable


picture

Type MS06R

Combination of stands MS01R and MS02R, package includes rubberized adapters and steel adapters in the “V” shape, removable, width range of adapters adjustable


picture

Type MS07R

Combination of stands MS01R, MS02R and MS03R, package includes rubberized adapters and steel adapters in the “V” shape and steel adapters for lifting up the motorcycle in the front, under the forks, removable, width range of adapters adjustable


picture

Type MS01NR

Lifts up the rear of the motorcycle under the swingarm, removable , includes rubberized adapters for comfortable and secure lifting of the motorcycle, width range of adapters adjustable


picture

Type MS02NR

Lifts up the motorcycle at front head mounting stand, lower part can be separated from the upper part, adjustable height of stand, bung used for lifting up the motorcycle is not included (you can choose it from our application table)


picture

Type MS03NR

Lifts up the front of the motorcycle under the forks, removable, steel adapters for a comfortable and secure lifting of the motorcycle arencluded, width range of adapters adjustable


Levers

picture

Description

Fully adjustable clutch and brake levers are made from duralumin T 70-75 and milled on modern CNC machines. Levers are 148mm long. A stainless steel box is inserted in the lever adjustment mechanism in order to increase its durability. They are made in seven colours. The anodized surface is protected by a special varnish against the UV radiation. Our levers are different from levers produced by other manufacturers because of their original design and manufacturing quality. Everything is made in the Czech Republic.


picture

Adjusting wheels

Adjusting wheels are made from duralumin T 70-75.Up to 6 positions of the levers can be adjusted thanks to adjusting wheels. Wheels are made in five colours and are protected by a special varnish against the UV radiation. Colour variations can be combined with different shades of levers.


picture

Adapters

Adapters are manufactured for more than 250 types of motorcycles. They are made from duralumin and manufactured on CNC machines, with anodized finish.


picture

Complete lever including adapter

Fully adjustable clutch and brake levers are made from duralumin T 70-75 and milled on modern CNC machines. A stainless steel box is inserted in the lever adjustment mechanism in order to increase its durability. Lever is attached to the adapter by a stainless steel screw. Lever is protected by a special varnish against the UV radiation.


Crash frames

picture

Description

Crash frames represent the best protection in case of a fall for motorcycles type Niked and Touring. Usually we supply them in black colour (specially heat-treated powder colour). Crash frames are made of tubes with different diameter, but we especially use 22mm and 25mm diameter tubes. The mounting kit which is part of the crash frames is already included in the pack and in the price. We offer crash frames for more than 30 types of motorcycles and we keep on complementing our range. Have a look in our application tables to find out if we have a crash frame for your motorcycle in the offer. If you cannot find it, do not despair and try to contact us, there is a possibility of custom manufacturing.


Tuning accessories

picture

Sport handlebars

Handlebars for sport bikes are made of high quality aluminium T7075. We offer them in black or silver finishing. By simple rotating of aluminium adapters you can change the angle of the handlebars from 15 degrees to 10 degrees. Handlebars are completely removable so when they are fitted to a motorcycle it is not necessary to remove the front forks.


picture

Handlebar ends

Great looking tuning accessory for your motorcycle. Handlebar ends for the handlebars are among the best-selling products. We offer them in three different shape variants. For gripping of the handlebar ends it is necessary to purchase black anodized adapters. These adapters will ensure that the handlebar ends will fit well on your handlebars.


picture

Stand support for swingarm

Stand support for swingarm are used to lift up the rear of the motorcycle by the appropriate mounting stand (in our offer for example MS02R, MS02NR). Screws M6, M8, M10 and M10x1,25 are used for mounting. It always depends on the manufacturer and the type of motorcycle. Screws are included in the pack. Stand support for swingarm are anodized to 7 shades as other products.


picture

Oil plugs

Replace original unattractive oil plugs. We offer them in 7 colours.


picture

Front and rear caps for brake fluid tank

Replace original black plastic cap for brake fluid tank. Caps are made from anodized aluminium in 6 colour shades.


picture

Fork preload adjusters

As the name suggests, the fork preload adjusters are used for comfortable adjustment of the front fork damping. The mounting of fork preload adjusters is simple and fast. They can be mounted continuously on the motorcycle because they do not interfere anything. When you stop during your trip you can simply adjust the front forks damping on your motorcycle. The fork preload adjusters are manufactured in 5 different sizes of the internal hexagon and in 7 colour shades (silver, red, blue, black, gold, orange and green).


picture

Nuts for front fork

Replace the original unattractive nuts for front fork.


picture

Screws for front spindle

Replace the original steel screws that are mounted to the front spindle. We offer them in 6 colour shades.


picture

Foot pegs

The inseparable part of each motorcycle is the foot pegs. Our company produces two types of foot pegs of high quality aluminium T7075. The foot pegs are available in 7 colour shades. There is a removable black plastic cover at the front, made of POM C material. It can be replaced in case of abrasion and you do not need to change the whole foot peg.


picture

Mirror blanking plates

Aerodynamic and sports shape, 5 colours variant.


picture

Extension of the mirrors

Extension of the mirrors is used both for side and height extension of the motorcycle and thus offers a better view. Reductions are made from aluminium, and on CNC machines, in two versions - with a classic M10 x 1.25 and M10 x 1.5 thread and in two colours.


picture

Adapters for increasing the height of handlebars

Adapters for increasing the height of handlebars are made from aluminium and with anodized surface finish. Handlebars are increased by 20mm, 25mm and 30mm. We offer them in black or silver colour.